Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable General Contractor Across Gulfport
Most general contractors in Gulfport quote the job, then sub it out to whoever’s available. We don’t. Our General Contractor crews work directly under Curtis Lane, and they know what salt air does to a house here. When you call (941) 655-9297, a live person picks up, we schedule the walkthrough, and you get a written price before any work starts. No numbers that move at the door. No surprises.
What you will find on this page: real price ranges for Gulfport’s market, exactly which materials fail early in salt air, and the coastal-spec fixes we spec that keep you from paying twice. If you’re in Gulfport and tired of contractors who don’t show, our Gulfport Home Remodeling team is the right place for you.
Key Takeaways:
- Written price before any work starts, every time
- 365-Day Done Right Promise on every finished project, in writing
- Background-checked, uniformed technicians on the job
- We know Gulfport’s bungalows, mid-century blocks, and raised coastal homes
Why Bradford Remodeling Co Tampa Is Gulfport’s Preferred General Contractor Company
Here’s the thing about Gulfport that most out-of-town contractors miss: the building code here is different than it is five miles inland. Within 3,000 feet of the mean high-water line, every exterior fastener has to be hot-dipped galvanized or stainless steel. A contractor who buys the same box of zinc-plated nails for a Gulfport job as they’d buy for a Brandon job is setting you up for shingle blow-off the first summer squall. We don’t do that. The Garrison Standard, the framework behind how we run every project, means we write the spec down, we order to that spec, and we show you the paperwork.
Part of the Garrison Partners family since 2004, Bradford Remodeling Co Tampa operates independently and answers to a single standard: written pricing, written guarantees, and people who do what they said they’d do. Curtis Lane runs the crews. When a Gulfport homeowner calls the office, they’re not routed through a call center. A live person picks up, 24 hours a day.
For more on how we serve this area specifically, see General Contractor in Gulfport.
Styles & brands we work with
Licensed General Contractor in Gulfport
A licensed General Contractor in Gulfport is the person of record on your permit, the one who schedules the inspections, and the one legally responsible for making sure the work hidden inside your walls meets Florida wind code. We hold that role on every project we take. From kitchen remodels in the old bungalows along 28th Street to full home additions on raised lots near the bay, our name goes on the permit and our signature goes on the written guarantee.
Storm-Hardening and Structural Work
Most of the homes in Gulfport were built before 1980. That means original roof sheathing, aging framing connections, and in many cases, no hurricane ties at all. When we open a wall or a roof here, we usually find what the last crew left behind. A kitchen remodel in Gulfport runs $14,000 to $45,000 depending on the structural upgrades hiding behind the drywall. Impact window installation runs $8,000 to $25,000, and it’s not a luxury here. It’s code on new work and the right call on older homes.
Kitchens and Baths in Older Homes
We do a lot of kitchens and baths in Gulfport’s 1920s bungalows and mid-century concrete-block homes. These are not open-plan, plate-glass houses. They’re small-roomed, lath-and-plaster, cast-iron-pipe houses. A bathroom remodel in a Gulfport home runs $9,000 to $28,000. A smaller bath runs $5,000 to $12,000. Every price is written down before you sign, and it doesn’t change unless you change the scope and we both agree in writing first.
Residential General Contractor in Gulfport
Hiring a residential General Contractor in Gulfport means hiring someone who manages the entire job: rough-in, dry-in, finishes, final inspection. That’s what we do. We don’t hand you a list of subs and a pat on the back. Our crew runs the schedule, keeps the site locked and clean, and calls in the inspections. If a third-party inspector flags something, we fix it before moving on. That’s not extra work. That’s the job.
Whole Home Renovations
Whole-home remodels in Gulfport often start with a structural question. Does the floor have to be replaced, or can it be sistered? Is that stucco cracking from settling or from salt-damaged mesh? We answer those questions before we pull the permit. A whole-home renovation on a mid-century block house near the water is different from the same job on a slab ranch in Largo. The number is different too, and we’ll put it in writing.
Deck and Exterior Work
High humidity and salt spray eat untreated pine and unprotected metal fasteners fast. On decks near the bay, we spec pressure-treated framing with stainless-steel hangers and Simpson connectors. Galvanized fasteners are the legal minimum within 3,000 feet of the waterline. Stainless is what we recommend, because it’s the difference between a deck that holds for 20 years and one that starts creaking in five.
Trusted Brands We Service in Gulfport
We install and service name-brand materials so the spec is traceable. For doors, we use Therma-Tru units that hold seals against humidity and wind-driven rain. For exterior work, we’ll spec Mr-Glass impact-rated glazing where the water table and wind zone demand it. For fencing and railings, Barrette posts and rails, installed with hot-dip galvanized anchors that don’t snap at ground contact. We keep local stock of common replacement parts for Gulfport jobs, which means fewer days waiting on a truck from a warehouse outside the metro.
See the difference
Before
After
Before
After
Before
AfterCommon General Contractor Problems We See in Gulfport Homes
- Corroded cast-iron vent stacks: Salt air eats the pipe from the outside while drain water wears it from the inside. By the time you smell it, the stack has already failed. We replace with PVC and inspect the roof penetration while we’re up there.
- Knob-and-tube wiring in 1920s bungalows: Along 28th Street and in the older blocks around it, original wiring is still live. A kitchen remodel can’t be permitted without addressing it. We rewire the affected circuits to code and document the panel upgrade.
- Zinc-plated roofing nails: They rust through in under five years of salt spray. Shingles peel off in the first good squall. We use hot-dip galvanized or stainless fasteners and we show you the box.
- Stucco cracking from rusted lath: Mid-century block homes with stucco over wire lath often fail at the bottom edges first, where salt moisture wicks up the wall. We cut out the rusted section, re-lath with galvanized mesh, and re-coat with a compatible mix.
Pricing for General Contractor in Gulfport, FL
Here are honest, market-calibrated number ranges for Gulfport. Not a bait-and-switch. Not “it depends.” These reflect what we see on bids that actually hold, in this market, on the housing types that dominate out here.
| Project | Gulfport Price Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Roof Replacement | $8,000 – $20,000 |
| Paver Patio Installation | $3,500 – $11,000 |
What moves the number: structural upgrades behind the drywall, the coastal-spec hardware your specific lot requires, and the age of the plumbing and electrical you’re connecting into. What doesn’t move the number: anything we can see before demolition. We write the price down first. Call (941) 655-9297 to schedule a free estimate.
We Also Serve Cities Near Gulfport
Our crews take on General Contractor work across the metro. We cover Gulfport directly, plus Tampa, Largo, Riverview, and Brandon. Same crew standards. Same written pricing. Same 365-Day Done Right Promise. If you’re getting bids from a few companies, compare the fine print before you sign.
Serving Gulfport, FL - Our Local Coverage Area
We’re based in the Gulfport area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About General Contractor in Gulfport
If your fence is within 3,000 feet of the mean high-water line, Gulfport code requires hot-dipped galvanized fasteners at minimum. Stainless steel is the stronger choice for fence gates, hinges, and post anchors because it lasts decades faster in salt air. Galvanized will pass code. Stainless will outlast it. Call (941) 655-9297 and we’ll spec whichever your lot line and budget require.
Standard vinyl window frames warp in Gulfport’s humidity and salt heat. Marine-grade aluminum holds its shape, keeps its seals, and carries an impact rating that vinyl doesn’t. The coastal spec costs more upfront, usually 20 to 30 percent over inland-spec vinyl. The inland spec goes in cheaper and fails earlier. Call (941) 655-9297 to get a written price on both options.
You’ll have to rewire the circuits the remodel touches, and bring those circuits to current code. You don’t have to rewire the whole house in most cases. That said, many homeowners use the kitchen remodel as the time to address the wiring panel and service. We scope both options and put both numbers in writing. Call (941) 655-9297 for an exact quote after a walkthrough.
An inland-spec paver patio uses standard bedding sand and standard joint sand. In Gulfport’s humidity and hard rains, that joint sand washes out within a year, the pavers loosen, and ants move in. The coastal-spec version uses a permeable base and a sealed joint compound. It costs more, roughly 15 to 25 percent more depending on the square footage. The cheap version gets rebuilt. Call (941) 655-9297 and we’ll show you the materials list before you sign.
You ask for the change order in writing, before the change is made. At Bradford Remodeling, every change to scope or price goes on a written change order and gets your signature before the work proceeds. No verbal add-ons that show up on the final invoice. That’s the discipline The Garrison Code requires. Call (941) 655-9297 if you want to see how it works on a real bid.
We’re honest in a way that’s annoying to some contractors. It’s why people in Gulfport keep our number. Call (941) 655-9297 for your free estimate.
Written by Curtis Lane, Owner at Bradford Remodeling Co Tampa, serving Gulfport and the surrounding metro.
