Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Bathroom Remodeling: The Tampa Owner’s Guide
A full Wellborn bathroom remodel in Tampa typically runs $9,000 to $28,000 installed, and we complete most mid-size projects in 2 to 3 weeks once material lands. If you’re staring at a vanity door that won’t close, a drawer face that’s delaminating, or cabinet boxes that have swollen from Tampa humidity, this is the right page. Most Wellborn owners discover a failing part the hard way: a hinge rips out of the cabinet box, a drawer runner bends, or the finish starts clouding at the seams where bathroom steam hits it daily.
We stock Wellborn-compatible replacement hardware, hinges, drawer guides, and cabinet box components at our Tampa shop. We also match Wellborn door styles and finishes for partial remodels, which matters more than you’d think when you only need one side of a vanity rebuilt. Bradford Remodeling Co Tampa is an independent contractor, not a Wellborn dealer or affiliate. That means we can source OEM parts when the project calls for it, or recommend a quality aftermarket match when the lead time on a factory part would stall your bathroom for six weeks.
Which Wellborn Models This Applies To
Wellborn builds bathroom vanities across three main series lines: the Estate Series (framed, traditional overlay doors), the Premier Series (framed, full-overlay), and the Select Series (frameless, full-access construction). Within those, bathroom vanities are sold as individual cabinets or as part of a vanity set, typically in widths from 24 to 72 inches and depths of 21 inches for standard bath vanities. The compatibility gotcha most owners hit: Wellborn has changed hinge mounting plates and drawer guide hardware across model years, and the parts are not always backward-compatible. A drawer guide from a 2015 Premier vanity will not always swap into a 2021 box without new mounting locations.
Here’s how to identify what you have. Open the vanity door and look at the hinge cup. Wellborn stamps or etches a model number on the hinge arm or the drawer guide rail in most cabinets made after 2010. Also check the inside of the cabinet box on the left or right wall. There’s usually a white or silver label with the cabinet’s order number and series code. If that label is gone, measure the face frame width, door overlay, and drawer box depth, then call us at (941) 655-9297 with those numbers. On the OEM versus aftermarket question: for hinges and drawer runners, the OEM part is usually within a few dollars of a quality aftermarket like Blum or Salice, so we default to the factory spec unless there’s a lead time problem. For door and drawer fronts, we match the Wellborn finish code rather than replacing the whole cabinet. That’s the smarter money move in a bathroom where an entire new vanity costs $800 to $3,000 installed and a drawer front replacement is a fraction of that.
Styles & brands we work with
Signs Your Wellborn Bathroom Remodeling Is Failing
- Door won’t stay closed or hangs crooked. The hinge plate has pulled from the cabinet box, usually because the screws stripped out of the particleboard or MDF substrate. In a bathroom, steam accelerates substrate breakdown and the screw holes wallow out fast.
- Drawer sticks, binds, or drops on one side. The drawer runner has bent or the mounting clip snapped. Wellborn uses undermount soft-close runners on Premier and Select lines. Once the clip lets go, the drawer rides on the cabinet floor and chews up the box edge.
- Finish clouding, peeling, or tarnishing at the lower door edges and drawer bases. This is moisture wicking into the cabinet face. Tampa’s humidity is the culprit. Wellborn’s catalyzed finishes hold up well, but a bathroom that runs hot showers without a good exhaust fan will break down any finish eventually.
- Cabinet box swelling at the toe kick or side panels. Water has been sitting against the base. Often it’s a slow toilet leak or splash from the tub that went unnoticed. The particleboard swells, the laminate separates, and the cabinet loses structural integrity.
- Soft-close feature stops working. The damper cylinder inside the hinge or the runner has failed. These are small, replaceable cartridges, not a reason to buy a new cabinet. We replace them routinely on service calls around Tampa.
Replacement Cost & What’s Included
A focused Wellborn bathroom vanity repair in Tampa, swapping hinges, drawer runners, or a damaged door, lands in the $300 to $1,200 range delivered. That includes parts, shop time, the service call, and our written workmanship guarantee. A full vanity replacement with a new Wellborn cabinet, countertop, faucet, and reconnected plumbing runs $3,000 to $8,000 depending on size and finish. A complete bathroom remodel with a new Wellborn vanity, shower, flooring, and fixtures sits in that $9,000 to $28,000 bracket.
What moves the price inside those ranges: the size of the vanity or bathroom, whether we’re doing a repair versus a replacement, the finish level you spec, and whether tile or plumbing rough-ins need to move. Every project gets a written price before any work starts. No numbers change at the door. And every completed job carries the 365-Day Done Right Promise: if the work doesn’t hold within a year, we return and fix it at no charge. That’s in writing, along with the line-item price, before we touch a screw.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Here’s the honest split. If a door is loose, you can snug the hinge screws carefully and see if it holds. If a drawer runner clip has popped off, you can reseat it if it isn’t cracked. That’s about where safe DIY ends. The reason we say that: Wellborn cabinet boxes in bathroom environments are often installed tight to walls with plumbing in the way, and the substrate is already compromised from moisture. The wrong length screw through the back of a door is a quick way to ruin it. And if water has compromised the box, replacing visible hardware only treats the symptom.
If the hinges have stripped out, call us. We predrill, glue in hardwood dowels, and remount the hardware so it holds. If the cabinet box is swelling, call sooner. Swollen cabinet boxes don’t self-correct, and a full failure means a flooded vanity that takes plumbing with it. Call (941) 655-9297 and we’ll do an honest assessment over the phone before anyone schedules a truck roll.
FAQs
A Wellborn vanity in a properly ventilated Tampa bathroom should last 20 to 25 years. In a bathroom with no exhaust fan and daily hot showers, expect finish clouding and substrate swelling in 10 to 12 years. Door hardware and drawer runners usually need replacement every 8 to 12 years regardless of the finish condition. Call (941) 655-9297 if you want us to assess what’s failing first.
Most Wellborn vanity problems are repairable, especially hinge failures, runner replacements, drawer front delamination, and isolated door damage. The exceptions are cabinet boxes that have swollen through the side panel or toe kick, where the structural panel needs to be rebuilt. We’ll tell you straight away which category yours falls into.
A hinge or drawer runner swap takes 1 to 2 hours on site once parts are in hand. A door or drawer front replacement takes 1 to 3 weeks, because we match the Wellborn finish code and order the component rather than forcing a mismatched door onto your cabinet. A full bathroom remodel typically runs 2 to 3 weeks in Tampa once material arrives.
We stock common hinge plates, soft-close dampers, drawer runner clips, and cabinet hardware on our Tampa service trucks, along with touch-up kits for the most common Wellborn finish codes. For full door, drawer front, or cabinet box replacements, we order to spec from our documented supplier list. We also maintain parts relationships for KraftMaid, Cambria, and Silestone for remodels that mix brands.
Get a Straight Number for Your Wellborn Bathroom Remodel in Tampa
If your Wellborn vanity is failing, don’t guess at the fix. Call (941) 655-9297 and we’ll price the repair or replacement in writing before any work begins. Curtis Lane runs Bradford Remodeling Co Tampa. We work by The Garrison Standard: a straight number, a clear scope, and no surprises at close-out. A real person answers the phone 24/7, so you’ll talk to someone who knows the trade, not a queue. Whether you’re in Seminole Heights, Hyde Park, or anywhere else in the Tampa area, we’ll get you an honest answer and a written price.
Written by Curtis Lane, Owner, Bradford Remodeling Co Tampa at Bradford Remodeling Co Tampa, serving Tampa and nearby areas.
