Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Kitchen Remodeling: The Tampa Owner’s Guide
Tamko kitchen remodeling in Tampa typically runs $14,000 to $45,000 installed, depending on cabinet scope, countertop material, and whether layout changes require moving plumbing or electrical. Bradford Remodeling Co Tampa stocks and installs Tamko-compatible components, and most homeowners call us after discovering water damage around the sink base, delaminating cabinet doors, or a countertop seam that has opened up. The part that failed is rarely the whole kitchen. It’s usually one subsystem – cabinets, countertops, backsplash, or substrate – that gave out first, and the rest of the room is still sound.
We’re an independent contractor, not affiliated with Tamko, but we work with Tamko-built and Tamko-specified kitchens across the Tampa area regularly. Curtis Lane and our crew see these kitchens in Seminole Heights bungalows, Westchase track homes, and South Tampa remodels. The failure patterns are consistent, and so are the fixes. Straight number, clear scope, no surprises at close-out.
Which Tamko Models This Applies To
Tamko’s kitchen lineup splits into three broad families: builder-grade entry lines (typically sold through regional suppliers in volume), mid-tier lines with plywood box construction, and premium full-overlay styles with soft-close hardware. The compatibility gotcha most Tampa homeowners hit is that Tamko changed drawer box construction specs around 2016. Pre-2016 boxes use edge-banded particleboard with a specific undermount slide profile. Post-2016 boxes moved to a different slide mounting depth. A replacement drawer that fits one will not seat correctly in the other.
To identify what you have, pull a drawer and check the slide brand on the side rail – Blum and Salice are the two common Tamko OEM slides. Measure the drawer box height and note whether the cabinet box is particleboard or plywood. That tells us whether you need OEM Tamko replacement parts or whether a quality aftermarket equivalent from a brand like KraftMaid will match the existing footprint. For Countertop surfaces, Tamko kitchens in Florida often ship with laminate or a builder-grade solid surface. If you’re replacing countertops on an existing Tamko cabinet layout, the cabinet boxes themselves usually have to be checked for water swelling before any new top goes on. We stock KraftMaid, Cambria, and Silestone components on the truck for cross-compatibility when OEM Tamko parts are backordered or discontinued.
Styles & brands we work with
Signs Your Tamko Kitchen Remodeling Is Failing
- Cabinet doors that no longer close flush or hang slightly crooked. Hinge screws in particleboard boxes strip out over time, especially in Tampa’s humidity, which swells the board and loosens the screw seat. The fix is usually a hinge backplate replacement, not a new door.
- Soft-close drawers that slam shut. The damper inside the slide wears out or the slide’s plastic clip cracks. Replacing the slide is straightforward; ignoring it will eventually crack the drawer box itself.
- Laminate peeling at the sink base or dishwasher opening. Moisture from Florida’s humidity and everyday splash exposure works under the edge banding. Once the substrate swells, the only real repair is a new cabinet box.
- Countertop seams that have separated or darkened. Builder-grade solid surface seams fail after years of expansion and contraction cycles. Tampa kitchens without range hood venting make this worse because heat and grease push moisture into the seam line.
- Backsplash grout that crumbles or tile that sounds hollow when tapped. This usually means the original installer set tile on drywall without proper waterproofing behind the sink. The tile is still usable; the substrate and grout are not.
Replacement Cost & What’s Included
For a full Tamko kitchen remodel in Tampa, budget $14,000 to $45,000. The spread is driven by cabinet count, countertop material, whether you move plumbing or electrical, and whether we’re repairing water-damaged substrate before new finishes go in. A partial replacement – say, new cabinets and countertops on an unchanged floor plan with backsplash kept as-is – lands on the lower end. Moving a sink or range, opening walls, or replacing subfloor after a long-term leak pushes you higher.
Here’s how typical Tampa pricing breaks down:
| Scope | Typical Tampa Installed Range |
|---|---|
| Full kitchen remodel (cabinets, counters, backsplash, island) | $14,000 – $45,000 |
| Small kitchen remodel (limited cabinet run, laminate or basic stone) | $9,000 – $20,000 |
| Cabinet installation only (replacement boxes, new doors/hardware) | $4,000 – $13,000 |
| Countertop installation only (over existing sound cabinets) | $2,000 – $6,500 |
| Backsplash installation only | $800 – $2,500 |
| Kitchen island installation (new build or major repair) | $3,000 – $10,000 |
Every line item is written down before work starts. That’s The Garrison Standard, the operating framework Bradford Remodeling has used since 2004. If we price a job at $22,400, that’s the price. No change orders because we didn’t measure right, no “we found rot” surprises at the door. If the work doesn’t hold for a full year, the 365-Day Done Right Promise means we come back and correct it at no charge. You get the signed guarantee in your hand at close-out, not a verbal promise.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There are a few things a Tampa homeowner can safely check before calling anyone. Look under the sink with a flashlight and press the cabinet floor with a flat hand. If it gives or feels soft, you have water damage that will only get worse. Pull a drawer and check the slide brand. Snap a photo of any cabinet label still attached – Tamko labels sometimes carry the line code and date stamp on the back of a drawer front or inside a sink base door. That information saves us a diagnostic trip and gets you an accurate price faster.
What you should not do is attempt to remove or rebuild cabinetry that’s been water-swollen, especially in a kitchen where the plumbing rough-in is active. Demo around supply lines and drain pipes without shutting off water correctly is how a $600 cabinet replacement becomes a $6,000 flood repair. Countertop removal also involves weight and seam cutting that most homeowners are not equipped to handle safely. When the part is structural, the contractor discount is cheaper than the homeowner learning curve. Call us at (941) 655-9297 and we’ll schedule a site look.
FAQs
Tamko builder-grade cabinets in Tampa’s climate typically give you 10 to 15 years before door or box failures start, while mid-tier and premium lines with plywood construction can run 20 to 25 years. The single biggest lifespan killer here is unvented range hoods and sustained sink moisture. Call (941) 655-9297 and we’ll assess what you have before you spend on replacement.
Yes, in most cases the failure is isolated to one system – a cabinet box, a drawer slide set, a countertop seam, or backsplash substrate – and we repair that system without demoing the whole kitchen. The decision comes down to whether the existing cabinets are structurally sound enough to justify new finishes. A written inspection report tells you which way to go.
Most full kitchen remodels take three to six weeks from demo to final hardware install, depending on cabinet lead times from manufacturers like KraftMaid and whether countertop templating needs a second visit. We give you a written schedule at contract signing and update you when material deliveries land. Call (941) 655-9297 for a timeline specific to your scope.
We stock common Tamko-compatible components – drawer slides, hinge backplates, edge banding, shelf pins, and matching laminate – on our service trucks for same-visit repairs. For discontinued Tamko pieces, we source from a documented roster of aftermarket manufacturers including KraftMaid, Cambria, and Silestone, and we verify fit before ordering. You don’t chase parts; we do.
Get a Written Price from Bradford Remodeling Co Tampa
If your Tamko kitchen is showing age or you’ve got a specific part that failed, call Bradford Remodeling Co Tampa at (941) 655-9297. We’ll schedule a site visit, inspect the existing kitchen, and deliver a written line-item price before any work begins. You’ll know exactly who’s walking through your door – background-checked, uniformed technicians – and you’ll have a live person on the phone any hour of the day. Curtis Lane built this crew around tight scope management and framing that doesn’t move. We price it once. We explain every dollar. We hand you the guarantee in writing.
Written by Curtis Lane, Owner, Bradford Remodeling Co Tampa at Bradford Remodeling Co Tampa, serving Tampa and nearby areas.
