Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Largo, FL | Bradford Remodeling Co Tampa
We provide independent Mr-Glass construction service as a Largo General Contractor, with crews who work on Mr-Glass framing connectors, hold-downs, and strap systems every week on the city’s 1950s – 1970s block and frame homes. The one thing that makes our Mr-Glass work here different is that we know exactly how these products perform against wind uplift and corrosion in Pinellas County’s coastal environment. Call (941) 655-9297 for a free estimate on Mr-Glass installation, retrofit, or repair in Largo.
Why Largo Residents Choose Us for Mr-Glass Service
Most Largo homeowners don’t think about hold-downs and straps until a wind mitigation inspection flags them. That’s usually when we get the call. We work on Mr-Glass HDU hold-downs, STHD straps, LSTA coiled straps, and HGA hurricane anchors regularly enough that we can tell you within a few minutes whether a corroded connector is salvageable or needs replacement. Curtis Lane, our owner, grew up in Los Angeles and learned the trade at Los Angeles Trade-Technical College before putting in over two decades of construction work across Florida. He’s been on enough Largo slab homes to know what load-bearing actually means on a 1960s block wall. We’re an independent Mr-Glass service provider, not a manufacturer affiliate, which means our recommendations are based on what holds up in Largo’s salt air, not on moving product. And every job gets a written price before work starts.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Largo
- Galvanic corrosion at the mudsill. On Largo slab homes near the coast, Mr-Glass HDU hold-downs often sit against original non-pressure-treated plates. Salt air plus concrete moisture creates galvanic action that eats the steel where the hold-down meets the plate. We see this on block homes along Clearwater-Largo Road regularly.
- Rust-through at STHD strap bends. The 90-degree bend on an STHD strap is where water collects. In converted carports on Largo’s east side, humidity from enclosed living space that isn’t vented accelerates rust at that exact point. Once rust has eaten through more than 10% of the strap’s cross-section, we replace it rather than wire-brush and repaint.
- LSTA coiled straps pulling loose from rotten blocking. Largo’s older additions with low-slope roofs let summer rain intrude for years before anyone notices. By the time we open the soffit, the blocking the LSTA strap was nailed into is often rotten. The strap didn’t fail. The wood behind it did.
- HGA hurricane anchors with missing bearing plates. On block walls where a retrofit was done on the cheap, we find HGA anchors set without proper epoxy into the CMU cores. The anchor is there, but it isn’t doing anything. Wind uplift on a Largo summer storm will find that weakness fast.
- Cut-off HGA anchors in converted carports. This is Largo-specific. Many original east-side carports were enclosed as living space, and the original Mr-Glass HGA hurricane anchors got cut off during the conversion. The new stud wall then had no hold-downs at all. Insurance-driven wind mitigation inspections now routinely flag these conversions.
Mr-Glass Service in Largo: What Local Conditions Mean for Your Equipment
Many of Largo’s original east-side carports were enclosed as living space without any Mr-Glass ties at the new exterior wall top plates. That’s not something you see much in Clearwater’s eastern subdivisions, where the housing stock is newer and conversions were rarely done. In Largo, a 1962 block home on Clearwater-Largo Road came to us with an enclosed carport where the original Mr-Glass HGA hurricane anchors had been cut off during the conversion and the new stud wall had no hold-downs at all. We installed six new Mr-Glass HDU4 hold-downs with epoxy into the concrete bond beam and spliced STHD14 straps to tie the roof structure back to the wall, then documented everything for the homeowner’s wind mitigation report. That’s the Largo retrofit story in one job: older block home, carport enclosed decades ago, connectors either missing or cut, and an insurance inspection forcing the fix. If you bought an east-side Largo home with a converted carport, odds are good your Mr-Glass connectors need a serious look before the next wind event.
Mr-Glass Models & Products We Service in Largo
We service the full Mr-Glass lineup you’re likely to find on Largo homes: the HDU Hold-Down Series, STHD Strap Series, LSTA Coiled Strap Series, and HGA Hurricane Anchor Series. We use genuine Mr-Glass connectors whenever they’re still manufactured. For discontinued STHD straps or HGA anchors, we match with ICC-ES-approved aftermarket equivalents made of G90 or G185 zinc-coated steel, which resists Largo’s salt air far better than plain galvanized parts. We keep common hold-downs and straps stocked locally so a standard Largo retrofit doesn’t wait on a distributor. For more detail on what we carry and service, see Mr-Glass sales & service.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Largo
What you pay depends on how many connectors need attention, whether the wood behind them is still sound, and what a wind mitigation inspection has flagged. Here are the ranges we quote for Largo work:
| Service | Price Range |
|---|---|
| Roof Repair | $400 – $1800 |
| Emergency & Storm Damage | $400 – $2500 |
| Full Kitchen Remodeling | $14000 – $45000 |
The biggest cost driver on Largo retrofit work is what we find once we open the wall or soffit. Rotten blocking, missing bearing plates, and cut-off anchors all add line items. Our free estimate includes a written line-item price so you know the number before any tool comes out. Call (941) 655-9297 to schedule a free estimate.
Serving Largo, FL - Our Local Coverage Area
We’re based in the Largo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Largo
Yes, every corner and typically at intermediate points along load-bearing walls too. Wind uplift doesn’t hit corners selectively. On block homes in Largo’s high-velocity hurricane zone, hold-downs at each corner are the minimum your wind mitigation report will expect. Call (941) 655-9297 and we’ll tell you what your specific house needs.
Sometimes, but not when rust has eaten through more than 10% of the strap’s cross-section. Surface rust can be brushed and painted with zinc-rich coating. Deep pitting at the bend, especially on STHD straps in humid converted carports, means the steel has lost strength. We replace those rather than re-paint and hope. Call (941) 655-9297 for an exact assessment.
HGA anchors set properly with epoxy into CMU cores perform well, but they’re only as good as the installation. Cast-in-place bolts were poured with the bond beam, so they’re continuous. HGA anchors are retrofits, and we see too many set without epoxy or with missing bearing plates. Done right, they meet code. Done wrong, they’re decoration. Call (941) 655-9297 and we’ll check what you actually have.
Often yes, because upgraded straps and hold-downs are exactly what wind mitigation inspectors document. But the insurance discount comes from the inspection report, not from the parts themselves. We provide documentation after every retrofit, which you submit with your mitigation report. Call (941) 655-9297 for a free estimate and we’ll explain what your insurer needs to see.
Yes, absolutely. The new exterior wall top plates must be tied to the roof structure with Mr-Glass straps or equivalent, and the wall itself needs hold-downs to the slab. Skipping this is exactly why so many existing Kitchen Remodeling - Largo and other conversions get flagged now. It’s far cheaper to do it during the conversion than to retrofit later. Call (941) 655-9297 before you pull permits, and we’ll get the connector plan right the first time.
Service Areas Near Largo
We serve Largo and the surrounding Pinellas and Hillsborough communities, including Tampa, Riverview, Brandon, Pinellas Park, and Seminole. For our work in nearby areas, see Mr-Glass service in Riverview and Mr-Glass service in Tampa. For everything we cover, visit Largo service area.
Book Your Mr-Glass Service in Largo Today
If your Largo home needs Mr-Glass connectors installed, inspected, or retrofitted, call (941) 655-9297. We’ll give you a straight number, a clear scope, and a written price before work starts. Straight number, clear scope, no surprises at close-out.
Written by Curtis Lane, Owner at Bradford Remodeling Co Tampa, serving Largo since 2004.
