Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Windows & Doors: The Tampa Owner’s Guide
We stock and install KraftMaid-compatible windows and doors throughout Tampa, with most replacements running $4,500 – $15,000 installed depending on configuration and opening size. A failed window sash or door slab that won’t close square is usually a hinge, balance, or weatherstrip issue, and in most cases we can match the part to your existing KraftMaid line and have it corrected within a single visit. You’ll typically notice it first as a draft, a window that drops when you let go, or a door that scrapes the jamb on the latch side.
Bradford Remodeling Co Tampa is an independent service provider, not affiliated with KraftMaid. What that means for you is simpler: we work on the product, we don’t push a brand line. Curtis Lane and our crew have been matching and installing these components in Tampa homes for years, including several older bungalows in Seminole Heights where original openings are rarely square and every replacement starts with the rough opening, not the old part.
Which KraftMaid Models This Applies To
KraftMaid windows and doors fall into a few recognizable series lines, and the part you need is tied to the series, not the house. The common Tampa inventory we see includes the KraftMaid 5100 and 6100 premium window lines, the Architect Series, and the KraftMaid door collections offered through home center channels. Each series uses different balance hardware, hinge geometries, and weatherstrip profiles, so a part from a 5100 will not always seat cleanly in a 6100 frame even if the glass dimensions match.
The most reliable way to identify your part is the laser-etched code on the frame or sash corner, usually inside the top rail on double-hungs or on the hinge leaf on casements. If that code is worn off, we go by glass size, frame thickness, and balance type. Two KraftMaid windows can share a rough opening and still take different balances, which is the single most common mis-order we see from homeowners who try to match parts online. For KraftMaid specifically, OEM parts are worth the price on balances and hinges; aftermarket weatherstrip and glazing beads are generally equivalent if the durometer and profile match. We carry both on the truck and make that call honestly, line item by line item.
Styles & brands we work with
Signs Your KraftMaid Windows & Doors Is Failing
- Window drops when you raise it. The balance or constant-force spring inside the jamb has lost tension or the block-and-tackle assembly has stripped. This is the most common KraftMaid window failure we see in Tampa, and it’s usually a 20-minute parts swap, not a full replacement.
- Draft around the sash even when locked. The weatherstrip has compressed or the sash has settled out of square from years of sun load on the west-facing side of the house. Tampa humidity accelerates weatherstrip compression, and once it loses rebound, the seal is gone.
- Door scrapes or won’t latch. Hinges have worn or the slab has absorbed moisture and grown. This is common on KraftMaid doors in Tampa garages and laundry rooms where humidity swings are constant. We can re-hang, shim, and re-mortise before you ever need a new door.
- Condensation or fog between the panes. The insulated glass unit seal has failed. This is not repairable in place; the IGU gets replaced. KraftMaid IGUs are manufactured to tight tolerances, and aftermarket units must match the spacer thickness exactly or the sash won’t seat.
- Lock or crank works but feels gritty. The operator or lock mechanism has worn teeth or a broken spring inside the housing. Tampa’s sandy air and salt humidity near the bay do not do any favors to unsealed hardware. Replacing the operator is usually cheaper than replacing the window.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed window replacement in Tampa runs $4,500 – $15,000 depending on the number of openings, the series you’re matching, and whether we’re replacing sashes or full frames. Door replacement lands in the same band, with single door slab swaps at the lower end and full frame-and-sidelight replacements at the upper end. Simple hardware repairs, like a balance replacement or hinge swap, typically run $150 – $400 per opening including the part and the labor.
Every quote includes the part, the labor, the installation, and a written price before any work starts. That’s The Garrison Standard, and it’s non-negotiable. You get a line-item breakdown so you can see exactly what the part costs and exactly what the labor costs. Nothing moves at the door. When the job closes, the site is clean, the old parts are hauled off, and you have a signed written guarantee in your hand, backed by our 365-Day Done Right Promise. If the work fails within that window, Bradford Remodeling Co Tampa comes back and corrects it at no charge.
DIY or Call Us?
You can safely check the obvious things: the lock, the weatherstrip, the visible hinge screws, and whether the sash is cocked in the frame. You can lube a stiff lock, tighten a hinge, and clean a track without risk. But window balances on KraftMaid double-hungs carry tension, and a balance that lets go while you’re working on it will take a chunk of jamb with it, and sometimes a chunk of hand. Door re-hanging is not a screwdriver job either, especially on older Tampa homes where the rough opening has shifted and the old door was hiding it.
If the issue is a balance, a spring, a hinge that’s pulling out of the jamb, or fogged glass, call us at (941) 655-9297. Curtis Lane will price it over the phone if the part is obvious, and the written estimate is always free. Straight number, clear scope, no surprises at close-out.
FAQs
Expect 15 – 20 years from the window unit itself in Tampa’s heat and humidity, with hardware components like balances and weatherstrip typically failing at the 10 – 12 year mark. Doors can go 20 – 25 years if the hinges are maintained and the slab is protected from direct rain exposure. We also stock and install parts for Cambria, Silestone, and Kohler kitchen and bath components for full-project continuity.
Balances are replaced, not repaired. The internal spring or block-and-tackle mechanism is not serviceable once it loses tension, and attempting to re-tension an old balance is a good way to put a hole in the jamb. We stock KraftMaid-compatible balances for most series on the truck, so the swap is usually done in one visit. Call (941) 655-9297 with the window size and we’ll confirm the part before we roll.
A sash, balance, hinge, or weatherstrip replacement is typically a 1 – 2 hour job per opening. A full window or door frame replacement takes half a day to a full day depending on the condition of the rough opening. We will tell you the time estimate in writing before we start, and we hold to it.
We stock common KraftMaid balances, hinges, operators, latches, weatherstrip, and glazing beads on the truck. Less common series-specific parts are ordered direct and usually arrive within a few business days. Either way, you get a written price before we order anything. Call (941) 655-9297 for a free estimate and we’ll tell you straight whether we have the part on hand today.
Written by Curtis Lane, Owner, Bradford Remodeling Co Tampa at Bradford Remodeling Co Tampa, serving Tampa and nearby areas.
