Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling: The Tampa Owner’s Guide
KraftMaid kitchen remodeling in Tampa typically runs $14,000 to $45,000 installed, depending on cabinet layout, finish level, and whether you’re replacing the whole kitchen or just the failing components. We stock KraftMaid-compatible hardware, hinges, drawer slides, and door fronts on our trucks, and we can match most KraftMaid door styles and finishes within days, not weeks. Most Tampa homeowners discover they need us when a drawer slide lets go, a hinge strips out of the face frame, or the finish on a door front starts failing from Florida humidity.
Here’s the thing about KraftMaid cabinetry in this climate: it’s solid, American-made stuff, but Tampa’s humidity and salt air do not care what name is on the box. The box itself usually holds up. What fails first is almost always the hardware and the finish, especially in kitchens that see daily cooking and open windows. That’s where we come in. Curtis Lane and our crew have been repairing and remodeling KraftMaid kitchens across Tampa for years, and we’ve seen every failure mode this product line has to offer.
Which KraftMaid Models This Applies To
KraftMaid builds cabinetry across several series lines, and the part you need depends on which line is in your kitchen. The three you’ll see most often in Tampa homes are the Vantage series (framed construction, the most common in older Florida homes), the Venicia line (frameless, European-style, tighter tolerances), and the Worthington series (semi-custom, popular in higher-end remodels from the last 15 years). Each series uses different hinge mounting plates and drawer slide lengths, so a Vantage hinge won’t mount on a Venicia box without modification, and nobody wants a hinge that’s “close enough.”
To identify what you have, open a door and look at the hinge plate stamped into the side panel. KraftMaid prints a series code on most hinge cups, typically on the inside of the door. Drawer slides will have a length stamp in millimeters, usually 350mm, 450mm, 500mm, or 550mm. If the stamp is worn, measure the slide fully extended. When it comes to replacement parts, we lean OEM on hinges and slides because KraftMaid’s soft-close mechanisms are tuned to their specific door weights. Aftermarket slides of the same millimeter length are fine structurally, but the soft-close feel changes, and that’s the difference a homeowner notices every single day.
Styles & brands we work with
Signs Your KraftMaid Kitchen Remodeling Is Failing
- Drawer drops or sags when open. The slide bearing has worn or the mounting screws have pulled from the particleboard box side. We see this most in Tampa homes where the kitchen faces east and gets morning sun on the cabinet run.
- Door won’t stay shut or bounces back open. The hinge spring has lost tension or the mounting plate screws have stripped. KraftMaid’s older exposed hinges are notorious for this after ten-plus years of Florida humidity.
- Finish peeling or bubbling on door and drawer fronts. Moisture has gotten under the clear coat. This is not a cleaning problem. Once the finish delaminates, the door front needs refinishing or replacement, and matching an older KraftMaid stain requires a finish sample, not a photo from your phone.
- Soft-close mechanism stopped catching. The piston inside the slide or hinge cup has blown a seal. We replace these as a pair because the other side is usually a few months behind.
- Cabinet box joints separating or face frame pulling away from the box. This is structural, and it’s the one sign that a partial repair won’t fix. When a KraftMaid box fails, it’s usually because water sat against it too long from a leaky faucet or a dishwasher flood.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full KraftMaid kitchen remodel in Tampa runs $14,000 to $45,000, and where you land depends on three things: linear feet of cabinetry, finish grade, and whether the existing boxes are sound enough to reuse. If the boxes are square and dry, a door-and-drawer-front replacement with new hardware lands on the low end. If the boxes are shot or you’re reconfiguring the layout, you’re into new cabinet territory, which pushes toward the middle and upper end.
| Scope | Tampa Installed Range |
|---|---|
| Hardware replacement (hinges, slides, soft-close) | $200 – $800 per kitchen |
| Door and drawer front replacement, existing boxes | $4,000 – $9,000 |
| Full cabinet replacement, standard layout | $8,000 – $18,000 |
| Complete kitchen remodel with new KraftMaid cabinetry | $14,000 – $45,000 |
Every price we give is a written line-item number before work starts. That’s The Garrison Standard. No numbers that move at the door, no “we found something” conversations that end with a change order. We also carry the 365-Day Done Right Promise on every job: if something we installed fails inside a year, we come back and fix it at no charge. In writing, in your hand, at close-out.
DIY or Call Us?
You can safely do a few things yourself: tighten loose hinge screws, wipe down slides, and take clear photos of your existing hardware stamps so we can match parts over the phone. What we’d stop you from doing is trying to re-hang a heavy KraftMaid door by yourself, swap soft-close mechanisms without the right spring tool, or re-glue a separating face frame. Doors on these cabinets run 15 to 35 pounds, and a falling door will take a chunk out of your countertop or your foot. The hardware is under spring tension, and releasing it wrong sends small parts across the kitchen. We’ve fixed enough DIY hinge jobs to say this with confidence: the parts are cheaper than the repair to the repair.
If you want it squared away without the hassle, call us at (941) 655-9297. We’ll match the part, price it in writing, and get it installed without a production.
FAQs
KraftMaid cabinet boxes typically last 20 to 30 years in Tampa’s climate if they stay dry and the hardware is maintained. Hardware and finish life runs shorter, usually 10 to 15 years, because humidity and daily use take their toll on hinges, slides, and clear coats. Call (941) 655-9297 to have us assess your specific kitchen.
Yes, in most cases the boxes are fine and we replace doors, drawer fronts, hardware, or specific failing components. We’ll tell you plainly if the box is too far gone to save. Call (941) 655-9297 to have us take a look.
A hardware replacement is usually one visit. A door and drawer front swap runs three to five days. A full kitchen remodel with new cabinetry typically runs two to four weeks depending on scope and any countertop fabrication lead times. Call (941) 655-9297 for a timeline on your specific job.
We stock the most common KraftMaid hinges, slides, and soft-close mechanisms for Vantage, Venicia, and Worthington series cabinets, plus a range of door and drawer front styles that can be ordered within days. For exact-match finishes, we order from KraftMaid’s current catalog and request a finish sample before cutting a single piece. Call (941) 655-9297 and we’ll check our truck inventory while you’re on the phone.
Written by Curtis Lane, Owner, Bradford Remodeling Co Tampa at Bradford Remodeling Co Tampa, serving Tampa and nearby areas.
For KraftMaid kitchen remodeling in Tampa, call (941) 655-9297 to schedule your free estimate. Straight number, clear scope, no surprises at close-out.
