Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Bathroom Remodeling: The Tampa Owner’s Guide
A KraftMaid bathroom remodel in Tampa typically runs $9,000 to $28,000 installed, depending on cabinet configuration, countertop choice, and whether you’re moving plumbing. We stock KraftMaid-compatible components and can usually have a crew on site within a week of your written estimate. You’ve likely landed here because a hinge is sagging, a drawer front has popped loose, or a vanity door no longer closes square against the frame, and you want to know whether it’s a quick fix or the start of a full bathroom gut.
Most Tampa homeowners discover a KraftMaid failure the slow way: a drawer that starts sticking during the humid months, then one day refuses to close at all. The moisture load in a Florida bathroom is relentless on particleboard cabinet boxes and MDF door cores. What starts as a cosmetic annoyance usually traces back to substrate swelling inside a cabinet base that’s been wicking water from a leaking wax ring or a caulk line that failed behind the toe kick.
We handle both ends of this in Tampa: the small repair that gets you five more years, and the full KraftMaid bathroom replacement when the cabinet boxes are too far gone. Bradford Remodeling Co Tampa is an independent contractor, not a KraftMaid dealer or affiliate, which means we don’t have to sell you a whole vanity when a single drawer front replacement is the honest fix.
Which KraftMaid Models This Applies To
KraftMaid’s current bathroom lines share a lot of guts across price points: the same 3/4-inch plywood sides, the same soft-close hinge geometry, the same 18-inch and 21-inch vanity depth options. The Venicia, Benton, and Durham door styles all hang on a standardized frame, which means a replacement hinge or drawer glide for one series often fits the others. The compatibility gotcha is in the door overlays: Venicia uses a full-overlay hinge plate, while many Benton builds are half-overlay, and the two are not interchangeable. If you order the wrong plate, the door won’t sit flush no matter how you adjust it.
To identify your KraftMaid spec before calling, check the inside of a drawer box or the backside of a door. KraftMaid stamps a product code and date there, usually in black ink. The date matters: pre-2016 cabinets used a different drawer glide bracket than current production. Aftermarket glides fit both, but the mounting hole pattern doesn’t match, so the installer ends up drilling fresh holes and telling you it’s fine. It usually isn’t, long-term, unless the new holes get sealed against moisture properly.
For door hinges, KraftMaid uses a 35mm cup standard, which is good news because that’s the industry norm. A quality aftermarket hinge from a brand like Grass or Blum drops right in and often outlasts the original. For drawer boxes, we tell Tampa owners to stay with KraftMaid-authororized replacement parts when the cabinet is still under warranty, and after that, any solid maple dovetailed box is a legitimate upgrade. The key phrase: if the cabinet box is not swollen or delaminated, fix the part. If the box is soft at the corners, you’re into replacement territory.
Styles & brands we work with
Signs Your KraftMaid Bathroom Remodeling Is Failing
- Drawer starts sticking or dragging during Tampa’s summer months. This is almost always substrate swelling from absorbed moisture: the drawer box has picked up humidity, or the cabinet base is wicking water from a slow leak at the supply line. Fix the leak first, then assess the drawer.
- Door no longer closes square against the frame. The hinge has sagged or the mounting plate has pulled loose from the cabinet side. In a bathroom, the particleboard behind the hinge plate is often the real culprit; once it goes soft, new screws alone won’t hold it.
- Finish peeling at the bottom edge of a vanity door or drawer front. This is water standing on the floor and getting pulled into the MDF core, usually from post-shower splash-out or a caulk failure at the base of the vanity. Florida’s heat and humidity accelerate delamination along this edge faster than anywhere else in the house.
- Staining or soft spots behind the toe kick. You feel it before you see it: the toe kick gives when you push against it. By then, water has been sitting underneath the vanity long enough to break down the cabinet base. This one is almost never worth repairing.
- Soft-close mechanism stops catching. The damper inside the hinge has worn out, or the drawer glide’s soft-close catch has snapped. These are simple part swaps if caught early; if ignored, the extra slamming forces age the hinges and drawer joints prematurely.
Replacement Cost & What’s Included
For a KraftMaid bathroom remodel in Tampa, plan on $9,000 to $28,000 installed. A smaller bathroom with a single 48-inch vanity, top, faucet, and no plumbing relocation lands at the lower end, around $9,000 to $12,000. A larger master bath with a custom KraftMaid double vanity, Cambria or Silestone top, two sinks, and new lighting or tile work pushes toward the upper end, especially if you’re moving a drain line or dealing with the older green-board walls common in Tampa homes built before 1985.
| Scope | Typical Tampa Installed Range |
|---|---|
| Single KraftMaid vanity replacement (48-60 in., with top) | $2,500 – $6,500 |
| Double vanity with Cambria or Silestone surface | $5,000 – $11,000 |
| Full small bathroom remodel (fixtures, vanity, tile, paint) | $9,000 – $14,000 |
| Master bath remodel with custom cabinetry and plumbing changes | $16,000 – $28,000 |
Every Bradford quote is a written line-item price before work starts. You see parts, labor, and disposal separately. The number doesn’t move at the door, and we don’t send a change order because we “found something” mid-job. If the scope changes because you ask for something new, we write a new line item and you approve it before we proceed, same as Curtis Lane has run every Tampa job since he started working Florida construction. All work carries the 365-Day Done Right Promise: if the remodel fails inside a year, we return and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
What you can safely check yourself: a loose hinge screw, a soft-close damper that needs swapping, a drawer front that’s popped off but hasn’t cracked. These are fifteen-minute fixes with a screwdriver, and if you want to do them, go ahead. What goes wrong in a Tampa bathroom is the hidden part: a drawer that’s rubbing because the cabinet box has swollen, or a vanity that’s “just a little wobbly” because the floor underneath is rotting from a long-standing supply line drip. In those cases, you’re not fixing a part, you’re rebuilding a system that includes plumbing, substrate, and waterproofing.
Anything involving the drain assembly or the water supply lines means shutting off water to the bathroom and usually the whole house. If you’re not sure where your main shutoff is or when the flex lines were last replaced, that’s the day to call (941) 655-9297. A KraftMaid cabinet failure is manageable. Water running behind the wall while you figure it out is not.
FAQs
With proper ventilation and no hidden leaks, expect 15 to 20 years from the cabinet boxes, with hinges and drawer glides typically needing replacement around the 8-to-12-year mark. Bathrooms with poor vent fans or post-shower splash patterns can shorten that lifespan to 10 years or less because of moisture absorption in the MDF and particleboard components.
In many cases, yes: hinges, glides, drawer fronts, and soft-close dampers are all replaceable parts, and a solid cabinet box with a clean date code is worth repairing. If the cabinet sides are swollen, the base is soft, or the finish is delaminating across a broad surface, replacement is the honest call. Call (941) 655-9297 and describe what you’re seeing; we’ll tell you straight which category you’re in.
A single vanity swap with a new top and faucet is typically a one-day job. A full bathroom remodel with tile, plumbing adjustments, and custom cabinetry runs five to ten working days depending on scope and whether your Tampa home’s subfloor needs repair once the old vanity comes out.
We keep common 35mm soft-close hinges, drawer glide sets, and standard 18-inch and 21-inch vanity toe kicks on the truck for same-visit repairs. Model-specific drawer fronts, door panels, and finish-matched pieces are ordered from KraftMaid-compatible suppliers and usually arrive within five to seven business days. The written quote includes the part lead time before any work is scheduled.
Get a Straight Number Before Any Work Starts
If your KraftMaid bathroom needs a part matched, a repair priced, or a full remodel planned, call (941) 655-9297. A live person answers, day or night, and you’ll get a written price before any work begins. That price covers parts, labor, and disposal, and it’s backed by the 365-Day Done Right Promise. Straight number, clear scope, no surprises at close-out. We serve Tampa and nearby areas, and we’re ready to walk you through exactly what your bathroom needs.
Written by Curtis Lane, Owner, Bradford Remodeling Co Tampa at Bradford Remodeling Co Tampa, serving Tampa and nearby areas.
