Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Tampa Owner’s Guide
We stock and install Boral-compatible roofing parts across Tampa, with most tile repair and replacement jobs landing between $600 and $2,500 installed. The breakdown depends on whether you’re fixing a single cracked tile, swapping a section of damaged underlayment, or resealing flashing. What usually brings a homeowner to this page is the same thing: you spot a broken tile from the driveway, find water staining on a soffit, or a storm just passed through and left a section of roof looking chewed up.
Tampa’s weather does not go easy on Boral roofs. Between the afternoon thunderstorms, the salt air rolling in from the bay, and summer heat that bakes the underlayment, a roof that was installed ten years ago is not the same roof today. Boral tile itself is tough, concrete and dense, but the parts around it fail first. Flashing. Underlayment. The sealant where tile meets a pipe boot or a valley. That’s where most Tampa repair calls start.
Which Boral Models This Applies To
Boral makes several concrete and clay tile profiles, and the part match matters. The main lines you’ll see on Tampa roofs are the Barcelona, Tuscan, and Capistrano series, plus the newer flat-profile options. Concrete tiles from Boral carry a physical density that gives them a heavier, more solid feel than painted clay. That density is also why a cracked Boral concrete tile doesn’t just look bad, it lets moisture sit against the underlayment underneath.
Here’s the compatibility gotcha most homeowners don’t know: Boral tile profiles are not interchangeable across series. A Barcelona barrel tile will not seat correctly against a Tuscan flat tile, even if the length looks close. The lock system on the side of each tile is specific to the profile. We measure the tile’s length, width, and barrel height on site, and match it against Boral’s current profile charts before ordering or pulling from stock. If your roof predates Boral’s acquisition of the US tile plants, we may be matching a legacy profile, which sometimes means going with an aftermarket tile that mirrors the original geometry. We will tell you if that’s the case, and we’ll show you why the aftermarket tile we’re proposing sits correctly against your existing field tiles. Straight answer either way.
Bradford Remodeling Co Tampa is an independent service provider. We are not affiliated with Boral, and any warranty on our work comes from us, in writing, under the 365-Day Done Right Promise. If the repair or replacement fails within one year, we come back and correct it at no charge.
Styles & brands we work with
Signs Your Boral Roofing Is Failing
- Water staining on the soffit or fascia. This usually means the underlayment has failed at an eave or a valley, not that the tile itself is broken. The tile sheds water, but the underlayment is what keeps it out of your house. In Tampa’s rainy season, a failed underlayment shows itself fast.
- Cracked or missing tile after a storm. Wind-driven debris from a strong squall can crack concrete tile. A single cracked tile lets water hit the underlayment directly, and that underlayment was never meant to be a permanent wearing surface.
- Granules or small tile chips collecting in the gutters. Concrete tile sheds small fragments as it weathers. A little is normal. A pile in the downspout after every rain is a sign the tile surface is degrading faster than it should, often because of a manufacturing variation or consistent foot traffic on the roof.
- Loose or lifted tile at the rake edge or ridge. The fasteners that hold tile at the edges fail before the tile does. A lifted ridge cap tile lets wind get underneath the whole assembly. We see this often in Tampa neighborhoods with large live oaks hanging over the roofline.
- Damp spots on the ceiling under the roofline, not the middle of the room. That’s pointing to a penetration: a pipe boot, a skylight curb, or a valley where flashing has separated. The tile is fine. The waterproofing around the opening is gone.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Tampa, a Boral tile roof repair runs from $600 to $2,500 installed. Here’s the line-item reality, because you deserve to see where the money goes:
- Single tile replacement (matched profile): $150 – $450 installed. The spread depends on whether we can access the tile from a ladder or need full roof staging and whether the tile is a current profile or a legacy match.
- Localized flashing repair (pipe boot, valley, chimney saddle): $400 – $1,200. This includes removing the surrounding tile, cutting out the failed flashing, installing new material, and reseating the tile. The tile is the expensive part to remove and reset, not the metal.
- Underlayment section replacement (eave, valley, or penetration): $800 – $2,500. This is a bigger job because it requires pulling a section of tile, replacing the underlayment, and reinstalling everything to a proper lap pattern. Wind code in Tampa requires specific fastener patterns, and we do not shortcut them.
Every quote Brad Remodeling Co Tampa gives is a written price before work starts. The number on the quote is the number on the invoice. Your written scope includes the material, the labor to remove and reset tile, any required flashing, and haul-away of the old material. The 365-Day Done Right Promise covers the full repair for one year from completion.
We also maintain stock for roofing repairs, and we document every brand we install. When we source tile, flashing, or underlayment, it comes from a traceable manufacturer spec, the same way we handle KraftMaid cabinetry, Cambria surfaces, or Silestone counters elsewhere in the home. No mystery material, no “trust me” pricing.
DIY or Call Us?
You can inspect a Boral roof from the ground or a safe ladder position. Look for cracked tiles, lifted ridges, and any flashing that has pulled away from a pipe or chimney. What you should not do is walk a concrete tile roof. Concrete tile holds your weight until it doesn’t. A hairline fracture you can’t see becomes a tile that breaks underfoot, and now you’ve turned a $200 repair into a $1,500 section replacement. Also, working at height off a Tampa roof after rain or in the heat of an August afternoon is not worth the risk. Roof falls are one of the most common serious injuries in home repair, and the margin for error is zero.
If the project involves replacing underlayment, resetting tile to code, or working on a second-story roofline, call a professional. That’s what we do. Call us at (941) 655-9297 and we’ll give you a straight number for the repair. Curtis Lane runs the crew, and we write the price before we set a ladder.
FAQs
A properly installed Boral concrete tile roof in Tampa should last 40 to 50 years on the tile itself, but the underlayment underneath typically needs replacement every 20 to 25 years. Florida’s humidity and rainfall wear out the underlayment long before the tile fails. If your roof is 25 years old and still on its original underlayment, the tile may look fine while the waterproofing underneath is shot. Call (941) 655-9297 for an honest assessment of what your roof actually needs.
A single cracked tile can be patched with a concrete tile adhesive for a temporary fix, but the permanent solution is replacing the tile. Patching a concrete tile in Tampa’s sun and rain rarely bonds well long-term, and the crack allows moisture to sit against the underlayment. We recommend replacement over a patch for any crack wider than a hairline. We’ll show you the crack close-up and let you decide with a written price either way.
Most single-tile replacements and flashing repairs take one to three hours once the crew is on site. Underlayment section replacements typically run a full day. We schedule the work, show up when we say we will, and the site is clean when we leave.
We stock common Boral concrete tile profiles and can source any current production profile within a few days. If your roof uses a legacy Boral profile no longer manufactured, we’ll match it with a quality aftermarket tile that seats correctly against your existing field. We will show you the match in person before any tile is installed.
Call Bradford Remodeling Co Tampa at (941) 655-9297 for a free estimate on your Boral roof repair. Straight number, clear scope, no surprises at close-out.
Written by Curtis Lane, Owner, Bradford Remodeling Co Tampa at Bradford Remodeling Co Tampa, serving Tampa and nearby areas.
