Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Driveway & Pavers: The Tampa Owner’s Guide
We stock and install Jerith-compatible driveway and paver components across Tampa, with typical installed pricing running $7,000 – $18,000 for a full paver driveway and $3,500 – $11,000 for a paver patio. Most owners discover a problem the same way: a paver sinks after a heavy summer rain, an edge row starts wandering into the lawn, or the sand joints wash out faster than they should after Tampa’s afternoon downpours. Bradford Remodeling Co Tampa is an independent service provider, not affiliated with Jerith, but we work with their paver and aluminum fencing systems regularly and know where they fail in Florida soil.
Which Jerith Models This Applies To
Jerith’s residential line splits into two main tracks for driveway and hardscape work: their aluminum fencing and gate systems, and the paver-compatible edging and base components used alongside Belgard and Unilock pavers. The compatibility gotcha most Tampa homeowners hit is post spacing. Jerith aluminum fence sections are punched for specific post centers, and if the paver edge doesn’t line up with the post layout, you’re looking at a re-cut or a visible gap that collects debris. We measure the actual opening before quoting, not the nominal size on the box.
Identifying the right Jerith part starts with the model stamp. Look along the bottom rail or the hinge side of a gate for a pressed code. If the stamp is gone, post diameter and section width are the next check. OEM Jerith parts are worth the extra cost on gate hinges and latch posts because the factory sizing matches the section profile exactly. Aftermarket equivalents are fine for decorative caps and post inserts, but we’ve pulled enough cheap gate hinges out of Tampa yards to know the savings don’t survive one wet season.
Styles & brands we work with
Signs Your Jerith Driveway & Pavers Is Failing
- Sinking pavers near the driveway apron. This is almost always base failure. Tampa’s sandy loam shifts when saturated, and if the original install skimped on compacted limestone base, the pavers telegraph that movement within two or three years. We see it most in Seminole Heights and older Tampa neighborhoods where driveways were poured decades ago and pavers were added later without proper subgrade prep.
- Sand joints washing out after every rain. Florida’s afternoon storms are hard on polymeric sand. If the joints erode to bare gaps, water gets under the pavers and accelerates base failure. Re-sanding is a stopgap; the fix is usually re-leveling the affected section.
- Aluminum fence posts leaning at the paver line. Jerith posts set in concrete can still lean when the surrounding pavers heave. The post stays true; the pavers push against it. This is a subgrade issue, not a fence defect.
- Gate sagging or latch not catching. Jerith gate hardware is aluminum and holds up well, but the hinge screws strip in soft Florida soil conditions when posts weren’t set deep enough. A sagging gate grinds against the paver surface and leaves visible wear marks.
- Edge rows spreading into the lawn. Missing edge restraint. If the original install didn’t use paver edging or concrete haunching at the perimeter, the outer course walks outward under vehicle load and the whole field loosens up.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Tampa, a full Jerith-compatible paver driveway runs $7,000 – $18,000 installed, with the spread driven by square footage, current paver condition, and whether the existing base is salvageable. Paver patio work runs $3,500 – $11,000. Concrete driveway replacement sits at $4,500 – $12,000, and driveway sealing runs $250 – $700. Every Bradford Remodeling Co Tampa quote is a written line-item price before work starts, no revisits at the door. The price includes tear-out of failed sections, base correction where needed, paver or concrete installation, and joint sand. Our 365-Day Done Right Promise covers the work in writing: if it fails within a year, we come back and correct it at no charge.
DIY or Call Us?
A homeowner can safely check visible signs: sunken areas, washed-out joints, gate clearance, post plumb. What you shouldn’t do is start pulling pavers on a driveway that sees vehicle traffic. A failed base under a load-bearing surface isn’t a weekend fix, and resetting pavers without re-compacting the subgrade just moves the problem. Gate hardware on a Jerith system is low-tension and safe to inspect, but resetting a post in concrete requires the hole depth and mix right the first time. If you’ve got a leaning post against pavers, call us at (941) 655-9297 and we’ll tell you straight whether it’s a base issue or a fence issue. Estimates are free.
FAQs
A properly installed paver driveway on a compacted base lasts 20 to 30 years in Tampa, with the caveat that our wet season punishes weak base prep and cheap sand. Joints need re-sanding every three to five years, and edge restraint is the first thing to check as the lawn creeps in. Call (941) 655-9297 and Curtis Lane will take a look at what’s actually in the ground before anyone quotes a number.
Yes, if the base is still stable. We can lift and reset individual pavers, re-level a sunken section, and re-sand joints without tearing out the whole driveway. If the base has washed out or the paver itself is cracked through, replacement of that section is the honest fix. We’ll show you the difference in writing before work begins.
Most full paver driveway replacements in Tampa take three to five working days from tear-out to final sanding. Weather is the wild card; a week of afternoon storms can stretch it a day or two. We schedule for the driest window and keep the site clean every evening.
We stock common Jerith gate hinges, latch hardware, post caps, and section brackets on our trucks for call-out work across Tampa. For full sections and custom lengths, we order direct and typically have them in hand within a week. We also work with KraftMaid and Cambria on interior projects, so the same standard carries across every job we touch.
Written by Curtis Lane, Owner, Bradford Remodeling Co Tampa at Bradford Remodeling Co Tampa, serving Tampa and nearby areas.
