Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Kitchen Remodeling: The Tampa Owner’s Guide
If you have a Jerith kitchen and a part has failed, the full replacement cost for a Jerith kitchen remodeling project in Tampa runs $14,000 to $45,000 depending on cabinet count, countertop material, and whether we’re repairing one section or rebuilding the whole kitchen. We carry Jerith-compatible hardware, hinges, drawer slides, and cabinet components on the truck, and most single-part failures can be diagnosed and swapped the same day. The way owners usually find out is subtle at first: a drawer that catches, a hinge that grinds, or a cabinet face that starts to separate from its substrate after a few Tampa summers of humidity doing their work.
Bradford Remodeling Co Tampa is an independent service provider. We are not affiliated with Jerith. What we are is a crew that has worked on Jerith kitchens across Tampa long enough to know which parts fail, which ones hold up, and how to match replacements without guesswork.
Which Jerith Models This Applies To
Jerith has built cabinet lines under several series names over the years, and the parts are not universally interchangeable. The good news is that nearly every Jerith cabinet carries a manufacturer label inside the drawer box or on the back panel of the cabinet. Get a flashlight and open the drawer all the way. The label will show a series code, usually a two-letter prefix followed by numbers. Write it down before you call anyone. Curtis Lane has pulled enough of these labels to tell you that the code matters more than the color or door style when matching hardware.
Two compatibility gotchas we run into regularly in Tampa homes. First, Jerith changed hinge mounting patterns on several series in the mid-2010s. A hinge from a 2012 kitchen will not line up on a 2018 cabinet without drilling new bore holes, which we will not do to someone’s cabinet box without telling them first and putting the fix in writing. Second, drawer slide lengths vary by cabinet depth. A 22-inch slide does not substitute for a 24-inch slide, and forcing it is how drawers end up crooked and binding. We measure, we match, and we install the correct OEM part or a quality aftermarket equivalent that meets the same spec.
Styles & brands we work with
Signs Your Jerith Kitchen Remodeling Is Failing
- The drawer sticks, catches, or drops to one side. This is almost always a failed ball bearing inside the slide or a mounting screw that has backed out of the cabinet box. Left alone, the drawer starts chewing into the side panel.
- The cabinet door sags or scrapes the adjacent door. A hinge plate has bent or a mounting screw has stripped. In Tampa’s humidity, the particleboard around the screw softens over time, and the hinge loses its bite.
- The door closes on its own or won’t stay open. Either the self-closing mechanism is worn out or the hinge tension is shot. This is a small part with a big annoyance factor.
- The cabinet face is separating from the substrate. Moisture has gotten into the laminate or veneer. We see this most often under sinks and near dishwashers in Tampa homes, where steam and humidity work the glue joints every cycle.
- The cabinet box has settled or pulled away from the wall. That’s not a hardware failure. That’s an installation failure from a previous contractor, and it means the cabinet is not properly secured to studs. We fix the anchoring and then address whatever part got damaged in the movement.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A single Jerith hinge, slide, or cabinet component swap in Tampa typically runs $150 to $400 installed, including the part and our labor. A broader repair, like re-facing several doors or rebuilding drawer boxes, lands between $800 and $2,500. A full Jerith kitchen remodel runs $14,000 to $45,000 depending on the size of the kitchen, the cabinet series, and whether countertops and backsplash are part of the scope. We also work with KraftMaid, Cambria, and Silestone lines, so if you are blending Jerith cabinets with new surfaces, we can coordinate the whole spec sheet.
Every quote we give in Tampa is a written line-item price before any work starts. No numbers move at the door. The work carries the 365-Day Done Right Promise: if the part or installation fails within a year, we come back and correct it at no charge. That guarantee is in writing, signed, and in your hand at close-out.
DIY or Call Us?
Cabinet hardware is not high-tension like a garage door spring, and a homeowner can safely check for loose screws, measure a drawer slide, and read the Jerith label inside the drawer box. Where DIY goes wrong is drilling new holes in a cabinet box to make the wrong part fit. That’s how you ruin a $400 cabinet face to save $40 on a hinge. If the part does not match the screw pattern, stop and call (941) 655-9297. We’ll bring the right match, install it clean, and you won’t have extra holes in your kitchen.
FAQs
Jerith hinges and drawer slides typically last 10 to 20 years, but Tampa’s humidity cuts into cabinet boxes and particleboard mounting points much faster than the hardware itself. We replace hardware on cabinets that are otherwise fine, and we rebuild boxes when moisture has compromised the substrate.
Some hinge issues can be corrected by re-tightening or swapping a single screw with a larger diameter anchor, but most failed slides and hinges are wear-and-tear items that are cheaper to replace than patch. We’ll tell you straight which route costs less and lasts longer. Call (941) 655-9297 to talk it through.
A single hinge or drawer slide replacement takes under an hour if the part is in stock on the truck. Full cabinet box rebuilds or multi-door repairs can take a half day. We’ll give you a firm time window when you schedule.
We stock common Jerith-compatible hinges, slides, and mounting hardware on the truck, and we source series-specific parts from our Tampa supplier network. If you give us the label code from inside your drawer before the appointment, we’ll have the right part in hand when we arrive. Estimates are free at (941) 655-9297.
Straight number, clear scope, no surprises at close-out. Curtis Lane has been in Florida construction for over two decades, and his crews have worked on older Tampa homes including the bungalow stock in Seminole Heights, where you learn fast what a load-bearing wall actually tells you. When you call about a Jerith kitchen, you’re getting a crew that writes the price down, explains every line item, and stands behind the work for a full year.
Call (941) 655-9297 to schedule your free Jerith kitchen estimate in Tampa. We’ll give you a written price, a straight answer on what failed, and a fix that holds.
Written by Curtis Lane, Owner, Bradford Remodeling Co Tampa, serving Tampa and nearby areas.
