Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Kitchen Remodeling: The Tampa Owner’s Guide
ES Windows kitchen remodeling in Tampa typically runs $14,000 – $45,000 installed, depending on window count, cabinet scope, and whether we’re replacing one failed window unit or reframing the entire kitchen wall. If your ES Windows are fogged, leaking, binding, or showing water damage around the frames, you’re probably looking at a full replacement or a rough-opening reframe, not a reseal. Most Tampa homeowners discover the problem after a hurricane-season storm when water shows up on the counter or the sill feels soft to the touch.
We stock ES Windows-compatible replacement units and handle the surrounding kitchen scope: cabinetry around the window, sill repair, drywall, trim, and countertop tie-ins. You call, we come measure, you get a written price before anything gets ordered. Straight number, clear scope, no surprises at close-out.
Which ES Windows Models This Applies To
ES Windows manufactures impact-rated aluminum and vinyl lines distributed primarily through Florida building supply channels. The common residential lines we see in Tampa kitchens are the ES Windows Series 600 and Series 700 single-hung and casement units, along with horizontal sliders used over sinks and pass-through counters. Each unit carries an etched glass bug or a frame sticker with the model number, DP rating, and manufacturing date. If the sticker is gone, we measure the glass dimension and frame depth to identify the series.
One compatibility gotcha: ES Windows Series 600 frames are shallower than the Series 700 impact line. You can’t drop a Series 700 into a rough opening cut for a Series 600 without reframing the wall or adding a buck extension. We see this all the time when someone buys a replacement window at a supply house and finds it doesn’t fit. We verify the frame depth before we order anything.
On OEM versus aftermarket: ES Windows uses proprietary glazing beads and extruded frame profiles. Generic aftermarket glass packs fit poorly and void the manufacturer warranty. We use factory ES Windows components or verified direct equivalents, not box-store universal kits. Bradford Remodeling has documented KraftMaid, Cambria, and Silestone materials in our standard kitchen scope, but the window itself stays ES-specific.
For the record: Bradford Remodeling Co Tampa is an independent service provider, not affiliated with ES Windows. We install and service their product. That’s the full relationship.
Styles & brands we work with
Signs Your ES Windows Kitchen Remodeling Is Failing
- Condensation between the glass panes. The desiccant in the spacer has saturated and the seal has failed. Florida humidity accelerates this. Resealing isn’t a real fix on impact-rated units; the glass pack gets replaced.
- Water on the counter or windowsill after rain. The drainage weep holes in the frame are clogged or the flashing behind the window has failed. In Tampa, wind-driven rain finds every gap. This usually means pulling the unit and re-flashing, not caulking the exterior.
- Binding or sticking when you open the sash. The frame has shifted, or the balance system is worn. If the house is on slab and the kitchen wall faces west, afternoon heat expansion is doing work on that frame. A stuck window above the sink becomes a hazard fast.
- Soft drywall or discoloration below the window. Moisture has been getting behind the wall for months. By the time you see the stain, the substrate is compromised. We remove the drywall, check the studs, and replace what’s rotted before setting the new window.
- Visible frame separation at the corners. The extruded aluminum or vinyl frame is pulling apart, which breaks the seal and drops the impact rating. This is a structural failure, not a cosmetic one. The unit gets replaced, not repaired.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a single ES Windows kitchen unit replacement in Tampa, you’re looking at $1,800 – $4,500 installed, depending on size and whether we’re reframing. A full kitchen remodel with ES Windows, cabinetry, counters, and finishes lands in the $14,000 – $45,000 range. Here’s the breakdown:
- Single window replacement: $1,800 – $4,500
- Full kitchen remodel (window included): $14,000 – $45,000
- Reframe or rough-opening correction: $800 – $2,500 (added to window cost when needed)
- Interior sill and trim replacement: $300 – $900
What drives the range is the rough-opening condition. If the original builder flashed it correctly and the frame is square, it’s a clean swap. If there’s rot, settlement, or a previous contractor’s shortcut, we’re rebuilding before we install. Every quote is written before work starts, with the parts and labor listed line by line. The 365-Day Done Right Promise covers the full project: if the window or the surrounding work fails within one year, we come back and fix it at no charge. That guarantee is in writing, not verbal.
DIY or Call Us?
You can check the basics yourself: look for condensation inside the glass, run a finger along the sill after rain, try the sash movement, and look for frame separation at the corners. That’s diagnostic. It tells you what you’re dealing with.
What you shouldn’t do is pull an impact-rated window out of a Florida kitchen wall as a weekend project. These units are heavy, the rough opening may be carrying wall load, and improper flashing means water intrusion you won’t see until the drywall fails months later. We’ve corrected enough homeowner and handyman installs across Tampa to say this plainly: the risk isn’t the glass breaking, it’s the leak you don’t find for a year. If the window has failed, call (941) 655-9297. We’ll measure, verify the series, and give you a written price before anything gets ordered.
FAQs
Expect 15 to 25 years from an ES Windows residential unit in Tampa, with the lower end applying to west-facing walls that take the full afternoon sun and wind-driven rain. Coastal and bayfront properties with salt exposure push that number down further. Seal failure usually shows up as fogging between the panes between years 10 and 15, which is a glass pack replacement, not a full window replacement. Call (941) 655-9297 and we’ll tell you which one you’re looking at.
Yes, a fogged ES Windows unit can often be fixed by replacing the insulated glass pack rather than the entire frame, as long as the frame and hardware are still structurally sound. That repair runs less than a full window replacement and preserves the original weatherproofing. If the frame is separating or the impact rating is compromised, full replacement is the only honest option. We’ll tell you which applies to your window before any money changes hands.
A single window replacement in a Tampa kitchen takes one day from removal to final trim, assuming the rough opening is in good condition. If there’s water damage, rot, or a reframe involved, add one to two days for substrate repair and drying time. We give you the schedule in writing with the estimate, so you know exactly which it is.
We keep common ES Windows balances, locks, and glazing beads on the truck, but glass packs and full units are cut to your exact measurements and ordered per job. Order time for a replacement glass pack in Tampa typically runs 5 to 10 business days. We don’t start the clock until you’ve approved the written quote, and the price doesn’t change at delivery. That’s the Garrison Standard, and it applies to every job we take.
If your ES Windows kitchen unit has failed, don’t chase a box-store universal fix or wait through another Tampa storm season with water coming in the frame. Call Bradford Remodeling Co Tampa at (941) 655-9297. Curtis Lane and the crew will measure, verify the series, and put a written price in your hand before any work starts. That’s how we work, and that’s the only way we’ll work.
Written by Curtis Lane, Owner, Bradford Remodeling Co Tampa at Bradford Remodeling Co Tampa, serving Tampa and nearby areas.
