Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Kitchen Remodeling: The Tampa Owner’s Guide
CGI kitchen remodeling in Tampa typically runs $14,000 to $45,000 installed, depending on whether you’re replacing cabinet fronts and hardware or rebuilding the entire kitchen down to the studs. We match CGI-compatible cabinetry, countertops, and hardware to your existing layout, and most full-scale remodels take 4 to 8 weeks from demo to final walkthrough. The most common way homeowners find themselves here: a hinge snapped, a drawer slide gave out, a cabinet face warped from Florida humidity, or a countertop seam opened up after years of heat and moisture. You call because the part failed, but the conversation usually turns into fixing the whole system so it doesn’t fail again.
Bradford Remodeling Co Tampa is an independent remodeling contractor. We are not affiliated with CGI, but we work with their product lines regularly and know the spec differences that matter when you’re matching older cabinetry or selecting replacement components.
Key Takeaways:
- Installed kitchen remodel pricing in Tampa: $14,000 – $45,000, with a written price before any work starts.
- We match CGI-compatible cabinet boxes, doors, drawer fronts, hinges, and hardware to your existing footprint.
- Every project carries the 365-Day Done Right Promise in writing.
- Live person answers the phone at (941) 655-9297, 24/7.
Which CGI Models This Applies To
CGI cabinetry comes in a few distinct lines, and the compatibility gotcha most Tampa homeowners hit is assuming any replacement door or drawer front will fit. It won’t. CGI uses specific hinge bore patterns and door overlays that differ between their framed and frameless cabinet series. Before you order anything, pull a door off and measure the hinge cup diameter (typically 35mm on CGI frameless boxes) and the overlay distance from the door edge to the cabinet opening. If you don’t want to measure, we’ll do it on site and match the part to the spec.
For most failures, OEM CGI parts are the cleanest route. The hinge geometry and finish codes match, and you avoid the frustration of a drawer front that sits 3/16″ proud of the cabinet face. There are quality aftermarket equivalents for standard 35mm cup hinges and soft-close slides, and we’ll use them when they meet the same duty rating. For anything cosmetic, like a cabinet door or a decorative end panel, OEM is the better call because the finish batch codes matter. A door from a different production run can look close in a showroom and wrong under your kitchen lights.
We also stock and install parts for KraftMaid, Cambria, and Silestone when a mixed-brand kitchen needs matching across lines.
Styles & brands we work with
Signs Your CGI Kitchen Remodeling Is Failing
- Sagging or misaligned cabinet doors. The hinge side usually wears first, especially on high-use pots-and-pans cabinets. What starts as a door that doesn’t close flush becomes a hinge that strips out of the cabinet face because the screw holes have wallowed out.
- Drawer slides that stick, rattle, or drop. Ball-bearing slides wear unevenly, and in Tampa’s humidity, the lubricant breaks down faster. A drawer that used to close with one finger suddenly needs two hands and a hip check.
- Countertop seams opening or discoloring. Florida heat cycles expand and contract laminate and solid-surface seams. What was a hairline seam becomes a visible shadow line that catches crumbs and water.
- Cabinet boxes swelling at the toe kick or sink base. Water finds the lowest point. A slow sink drain leak or a dishwasher overflow wicks into the substrate, and the box starts to delaminate. By the time you see the face of the cabinet bubble, the substrate underneath is already compromised.
- Soft-close mechanisms failing on doors and drawers. The damper cartridge inside the hinge or slide loses its fluid, and the door slams instead of closing quietly. If it’s one door, you replace a part. If it’s every door in the kitchen, you’re looking at a systemic wear issue.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what kitchen remodeling costs in Tampa, broken down by the work you actually need:
- Full kitchen remodel: $14,000 – $45,000
- Small kitchen remodel: $9,000 – $20,000
- Cabinet installation: $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
The range comes down to three factors: linear feet of cabinetry, countertop material, and how much of the existing layout you’re keeping. A galley kitchen with stock cabinets and a laminate top lands at the lower end. A full rebuild with Cambria countertops, soft-close everything, and a kitchen island pushes toward the top. Every line item is written out before we start, parts and labor separated, so you know what the materials cost and what the crew costs. No number moves after the contract is signed. That’s The Garrison Standard, and it’s not up for debate.
All completed work carries the 365-Day Done Right Promise. If something fails within a year of close-out, we come back and correct it at no charge.
DIY or Call Us?
Some of this you can handle yourself without calling anyone. Replacing a single soft-close hinge or a drawer slide on a cabinet that’s still square and solid is a Saturday morning job if you have the right match. The tension adjustment on a soft-close door is a small screwdriver fix. What you shouldn’t do is attempt to rehang a full cabinet door that’s pulled its screws out of a compromised box, or try to force a warped cabinet back into square. When the substrate is swollen or the framing behind the cabinet has shifted, you’re not fixing the part. You’re masking a structural problem, and the part will fail again.
Cabinet work near electrical rough-ins or plumbing lines adds risk that isn’t worth taking on a DIY basis. If you’re not sure whether you have a part problem or a box problem, call (941) 655-9297. A live person answers, we’ll talk through what you’re seeing, and we’ll tell you straight whether it’s worth a service call.
FAQs
CGI cabinetry typically lasts 15 to 25 years in Tampa, but the hardware and moving parts usually need attention at the 8 to 12 year mark. Humidity shortens hinge and slide life faster than anything else in the kitchen. If your boxes are solid and your doors are square, you’re looking at part replacement, not a full remodel.
No, and you shouldn’t try. Once a hinge is wallowed out or a slide has lost its damper, the part is done. Replacing the hinge or slide is straightforward and costs far less than replacing a cabinet door or drawer box down the line. Call (941) 655-9297 if you want us to match the exact part.
A full kitchen remodel takes 4 to 8 weeks from demo to final walkthrough, depending on countertop fabrication lead times and whether we’re moving plumbing or electrical. A cabinet-only replacement or a part-specific repair is usually done in a day. We give you a written timeline with the written price, and we hold to it.
We stock standard 35mm soft-close hinges, drawer slides, and replacement mounting plates on the truck so most part replacements happen in one visit. Non-standard finishes and custom-sized doors are ordered to spec and arrive within one to two weeks. We’ll tell you up front which bucket your job falls into.
Straight number, clear scope, no surprises at close-out. If you’re tired of contractors who no-show and repricing at the door, call (941) 655-9297 for a free estimate on your CGI kitchen remodel in Tampa. We put every price and every guarantee in writing before a single tool comes out.
Written by Curtis Lane, Owner, Bradford Remodeling Co Tampa at Bradford Remodeling Co Tampa, serving Tampa and nearby areas.
