Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Tampa Homeowners Choose KraftMaid Construction
Bradford Remodeling Co Tampa is an independent Kraftmaid in Tampa service provider, and we handle cabinet installation, refacing, and full kitchen remodeling for homeowners throughout the area. We work on KraftMaid Vantage, Venicia, Passport Series, and Kemeron cabinetry, and we know how Tampa’s humidity, coastal air, and older home stock affect those specific lines. We are not affiliated with or authorized by KraftMaid, but our crews work on this product set daily, and we carry the OEM-compatible hardware to fix what fails. If you own KraftMaid cabinets in Tampa, call (941) 655-9297 and we will give you a straight answer on repair versus replacement.
Why Trust Bradford Remodeling Co Tampa for Your KraftMaid Construction?
Curtis Lane grew up in Los Angeles and learned construction at Los Angeles Trade-Technical College before spending more than two decades building and remodeling across Florida. His crew has worked in Seminole Heights, where those 1920s bungalows do not tolerate framing mistakes, and they bring the same discipline to every KraftMaid cabinet install or repair in Tampa. When a hinge plate pulls loose from a Vantage full-overlay door, Curtis does not guess. He checks how the cabinet was hung, what the wall framing is doing, and whether the face frame is still square before he decides on the fix.
That matters because KraftMaid construction is not just swapping a door. It is knowing which lines use full-overlay hinges, which use soft-close undermount slides, and which thermofoil edges will start peeling after a few years next to a dishwasher. Our technicians are background-checked and uniformed, and every job gets a written price before work starts. We stand behind the finished work with the 365-Day Done Right Promise, which means if something does not hold within a year, we come back and correct it at no charge.
Styles & brands we work with
Common KraftMaid Construction Problems We Fix in Tampa
The older KraftMaid lines have failure modes that show up in Tampa more than anywhere else. Here is what we see on service calls across the city.
- Sagging full-overlay hinges on Vantage uppers: The Vantage line uses concealed hinges that carry a lot of weight on full-overlay doors. After years in Tampa humidity, the particleboard around the hinge screws softens, the screws pull, and the door drops. We drill out the stripped holes, glue in hardwood dowel plugs, and remount the hinge plates. Sometimes we upgrade to a plate with broader load distribution. No new cabinets needed.
- Stiff or seized drawer glides on Venicia under-mounts: Venicia drawers ride on under-mount slides that are smooth when new but gather gunk and corrosion in coastal air. We see this a lot in South Tampa and Bayshore Boulevard homes where salt air gets into everything. We pull the drawer, clean or replace the glide, and realign the runner. If the drawer box itself has swollen, we assess whether it is salvageable or needs a new box in the same front.
- Thermofoil peeling on Passport Series doors near heat and moisture: Passport Series doors are thermofoil-wrapped. The edges delaminate when heat from a dishwasher or a slow under-sink leak works at the seam. Once the foil separates, no amount of glue makes it invisible. We replace the affected door or drawer front with a factory-matched piece, and we fix the underlying moisture source so it does not happen again the month after.
- Opening face-frame joints on Kemeron base cabinets: Kemeron builds use face-frame construction, and when floors settle or a slab shifts, those joints can open. In Tampa’s older neighborhoods, pier-and-beam foundations move more than newer slab-on-grade. We square the cabinet, re-clamp, and reinforce the joint, then address the floor issue if it is structural. If the box has racked beyond clamping, we replace that single cabinet rather than the entire run.
- Scribe gaps and filler strips after appliance changes: A new dishwasher or range rarely sits at the exact height of the old one. We see this with Passport Series base cabinets when homeowners swap appliances. The solution is a scribe-molded filler or toe-kick extension, cut to fit and finished to match. It sounds minor, but done wrong it looks like a patch job.
KraftMaid Parts & Our Repair-vs-Replace Approach
We default to KraftMaid OEM hardware and matching trim whenever it is available. For hinges, drawer slides, and touch-up finish, OEM gives the cleanest match. But some Vantage and early Venicia hinge plates are discontinued, and waiting on a back-ordered plate is not useful when your cabinet door is hanging by one screw. In those cases we use high-grade aftermarket components with the same throw and load rating. You get the door hung today, not in six weeks.
The honest call comes after water damage or structural movement. If the cabinet box is still solid, we refurbish and re-hang. If particleboard has swollen beyond clamping, we replace the damaged cabinet only. The materials matter less than the decision. A straight number and a clear scope avoid the surprise where a simple hinge fix becomes a full kitchen at close-out. Call (941) 655-9297 and we will tell you which one applies to your kitchen.
Our KraftMaid Service Process – Step by Step
We run KraftMaid work in Tampa with the same discipline we bring to General Contractor whole-home remodels. Here is the sequence.
- 1
Diagnosis: We identify the specific KraftMaid line, pull the model details, and determine what failed. On a Passport Series base cabinet, that means checking the toe kick, the door reveals, and the condition of the box behind the face frame.
- 2
Repair or install plan: We write out the exact scope, line by line, with a fixed price. For a Vantage hinge repair, that includes how many hinge plates, what fastening method, and whether the door needs adjustment after.
- 3
Work: We do the repair or installation using OEM or matching aftermarket parts. If we are installing new KraftMaid cabinets, we set them level, shim where the floor runs out, and tighten every connection to spec.
- 4
Test and adjust: We hang the doors, set the reveals, check drawer action, and adjust the soft-close mechanisms. In Tampa humidity, we leave slightly looser tolerances on wood drawers so they do not bind in August.
- 5
Warranty: Every completed job gets the 365-Day Done Right Promise in writing. If something fails within the year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Tampa
We work on the KraftMaid lines that show up in Riverview Kraftmaid service areas and Tampa homes. Vantage, which is the full-overlay line with concealed hinges and a consistent look on older remodels. Venicia, which uses under-mount drawer glides and shows up in newer spec kitchens. Passport Series, which is the thermofoil-wrapped value line and the one most affected by heat and moisture delamination. And Kemeron, the face-frame construction line that older homes in Seminole Heights and West Tampa often have. We stock common hinge plates, drawer slides, touch-up finish, scribe molding, and toe-kick material for these lines in our Tampa shop.
We also do full kitchen remodeling with KraftMaid cabinetry as the spec. If you are replacing the entire run, we measure, order, and install with the same process.
We Also Service These Brands
KraftMaid is a big part of our workload, but it is not the only cabinet line or surface brand we work on. We also handle Cambria and Silestone countertops, and Kohler and Toto fixtures in the kitchens and bathrooms we remodel. That matters when you need a new KraftMaid cabinet and the countertop is Cambria, and the sink is Kohler, and you want the whole thing to line up without hiring three separate companies. One crew, one scope, one written price.
FAQs – KraftMaid Construction Service in Tampa
Is Bradford Remodeling Co Tampa authorized by KraftMaid?
No, we are an independent KraftMaid service provider, which means we do not work for the manufacturer, and we do not represent ourselves as a factory-authorized shop. What we bring is local Tampa service and direct experience with the product lines that are in homes across this market. Our value is the independent diagnosis, not a manufacturer sales pitch.
Do you use genuine KraftMaid or OEM parts?
We use KraftMaid OEM hardware and matching trim whenever it is available and practical to source. For discontinued or back-ordered hinge plates and drawer slides on Vantage and early Venicia units, we use high-grade aftermarket components with identical specifications so your door hangs and your drawer opens correctly. We will tell you which part we are installing and why before we order it.
How long does KraftMaid service take?
Most hinge and glide repairs are completed in a single visit, typically within a few hours. Cabinet replacement or a full kitchen remodel runs on a schedule we lay out in writing before work starts. Call (941) 655-9297 and we will give you an honest time frame for your specific job.
What KraftMaid models or series do you cover?
We service and install KraftMaid Vantage, Venicia, Passport Series, and Kemeron, including Kraftmaid in Largo and throughout the region. That covers the full-overlay line, the under-mount glide line, the thermofoil line, and the face-frame line. We also handle older KraftMaid cabinets that are no longer in production, including many installed in Tampa homes during the 2000s building boom.
Will service void my KraftMaid warranty?
If your cabinets are still under KraftMaid’s warranty, using an independent provider does not automatically void it. However, we recommend checking your warranty terms because some component replacements, particularly aftermarket parts on a covered unit, may affect how the manufacturer handles a future claim. We will walk you through what we are doing and whether it makes sense to pursue a warranty claim first.
How much does KraftMaid construction cost in Tampa?
Cabinet installation in Tampa typically runs $4,000 to $13,000 depending on the size of the run and whether it is a repair, a partial replacement, or a full install. A full kitchen remodel with KraftMaid cabinetry ranges from $14,000 to $45,000. Here is the breakdown:
| Service | Tampa Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
These are the ranges we work from on KraftMaid projects in Tampa. Call (941) 655-9297 for a written, line-item price on your specific scope. Estimates are free.
Can you match the original finish on my older KraftMaid Vantage cabinets if I only replace a few doors?
Yes, within reason. Vantage finishes change slightly over production years, and Tampa sun fades some finishes faster than others. We order factory-matched doors where the finish is still in production, and for discontinued tones we work with a local finisher to match the existing color and sheen. The finished patch will be close, not invisible, but it beats replacing an entire run for two doors. Call (941) 655-9297 and we will look at your doors.
My KraftMaid Venicia drawer slides are stiff after years of Florida humidity – do I need new drawers?
Usually not. The slides gum up first, and the drawer box only becomes an issue if it has absorbed moisture and swelled. In most Tampa homes we clean or replace the slides, adjust the runner, and the drawer moves fine. If the box itself has swollen, we can rebuild the drawer box and re-use the existing front. New drawers are rarely the first move, and we will not sell you a set you do not need.
The thermofoil is peeling on my Passport Series doors near the dishwasher. Can you fix that or must I reface the whole kitchen?
Thermofoil delamination cannot be glued back invisibly. Once the foil lifts, the door or drawer front needs replacement. But that does not mean refacing the whole kitchen. We replace the damaged doors with factory-matched pieces and fix whatever moisture or heat caused the peel in the first place. Refacing becomes an option only if the peeling is widespread across multiple cabinet faces. Call (941) 655-9297 for a straight answer on your Passport doors.
Can you reinforce sagging KraftMaid full-overlay hinges on my Vantage upper cabinets?
Yes. We remove the hinge plates, drill out the stripped screw holes, set hardwood dowel plugs, and remount the plates. If the hinge itself is worn, we replace it with OEM or a matching aftermarket plate. The cabinet remains in place, the door comes back square, and the fix is permanent. This is one of the most common KraftMaid service calls we handle in Tampa homes from the 2005 to 2015 era.
I have a Kemeron base cabinet where the face-frame joint has opened from floor settling – is the cabinet salvageable?
Usually. If the box is still square enough to clamp and the particleboard has not crumbled, we glue, reinforce, and re-secure the joint, then address the floor movement that caused it. In Tampa’s older neighborhoods, pier-and-beam settlement is a common cause and the cabinet often outlives the movement. If the cabinet has racked beyond repair, we replace that single unit, not the entire kitchen. Call (941) 655-9297 and we will tell you which way it goes.
Book Your KraftMaid Service in Tampa, FL
Straight number, clear scope, no surprises at close-out. That is how we run KraftMaid work in Tampa. If your Vantage hinges are sagging, your Venicia drawers are binding, or your Passport Series doors are peeling, call (941) 655-9297. We will schedule a visit, diagnose the problem, and give you the written price before any work starts.
Written by Curtis Lane, Owner at Bradford Remodeling Co Tampa, serving Tampa since 2004.
